Drainage, Cleaning And Storage - mspa Fermo Owner's Manual

Water Treatment:
●
It is good practice with an existing spa to keep all air jets open and valves closed to allow chemically treated water to flush through all pipework.
●
Always follow the chemical manufacturer's directions, and the health and hazard warning.
●
Bromine are highly recommended for TEKAPO / BERGEN.
●
Never mix chemicals together. Add the chemicals to the spa water separately. Thoroughly dissolve each chemical before adding it to the water.
●
Please note that chlorine and bromine products should never be mixed. This is extremely dangerous. If you usually use chlorine-based products and
you want to switch to bromine-based products, or vice versa, it is essential that you change the spa water first.
●
Do not add chemicals if the spa is occupied. This can cause skin or eye irritation.
●
Do not overuse chemicals or use concentrated chlorine. This can damage the spa tub and cause potential hazard to your skin. Improper chemical use
will void the warranty.
Your spa comes with a standard chemical dispenser: This dispenser only applies to 1" tablet. Do not pour liquid or granules into the dispenser.
Rotate the upper cap
counter-clockwise until two arrows
meet. Remove the cap.

DRAINAGE, CLEANING AND STORAGE

Spa Drainage
1 Turn off all the functions
2
Floating Dispenser
Put in chemical tablets. Please
refer to the package or manual
of the chemical you purchased
for proper dosage.
3
5
15
minutes
BUBBLE
Press the
13
Rotate the upper cap
clockwise.
Adjust the dosage by rotating
the bottom cover to open or
close the dispenser holes.
4
Lift up the spa when there is only a little
water left.
6
BUBBLE TIMER
UP DOWN
button to dry the spa pool.
Put the dispenser in the spa.
Make sure the filter pump is
running during the sanitizing
process.