[Stabilizer]; [Date Stamp]; [Clock Set] - Panasonic Lumix DMC-FP7 Owner's Manual

For details on [Rec] Mode menu settings, refer to P39.
This automatically detects jitter and corrects for it.
Applicable modes: 1 < 5 /
[ON] / [OFF]
Note
• The Stabilizer function may not be effective in the following cases.
– When there is a lot of jitter, when the zoom magnification is high.
– In Digital Zoom range.
– When taking pictures while following a moving subject.
– When the shutter speed becomes slower to take pictures indoors or in dark places.
Be careful of camera jitter when you press the shutter button.
• The setting is fixed to [OFF] in [Starry Sky] in Scene Mode.
• The setting is fixed to [ON] in Intelligent Auto Mode, recording motion pictures or
[Self Portrait] in Scene Mode.
For details on [Rec] Mode menu settings, refer to P39.
This stamps the recording date on the picture when recording.
Applicable modes: 1 < 5 /
[DATE] (Recording date) / [TIME] (Recording date and recording time) / [OFF]
Note
• The recording date is automatically stamped on the picture. You do not need to specify date
print when printing at a shop or with your printer. (Dates will be overlapped and printed.)
• Dates are not stamped on the pictures taken with [Panorama Assist], [Hi-Speed Burst]
or [Flash Burst] in Scene Mode, or [Burst].
• The recording date, etc. can be stamped afterwards.
• It cannot be set in Intelligent Auto Mode. Setting of other Recording Mode will be
reflected.
For details on [Rec] Mode menu settings, refer to P39.
It functions in exactly the same way as [Clock Set]
Advanced (Recording pictures)

[Stabilizer]

[Date Stamp]

[Clock Set]

(P18)
- 86 -
(P96)
in the [Setup] menu.