Zooming With Touch Operation - Panasonic Lumix DMC-FP7 Owner's Manual

Note
• The indicated Zoom Magnification is an approximation.
• "EZ" is an abbreviation of "Extended Optical Zoom".
• The Intelligent Zoom employs the super-resolution technology, which can increase the
zoom ratio without noticeable deterioration of the image quality.
• When using the Digital Zoom, we recommend using a tripod and the self-timer
taking pictures.
• [i.Resolution] is fixed to [i.Zoom] in Cosmetic Mode, Intelligent Auto Mode or Scene
Mode . [i.Zoom] cannot be used in Motion Picture Mode or Macro Zoom.

[i.Zoom] cannot be used when in [High Sens.], [Hi-Speed Burst], [Flash Burst] or
 ¼
[Pin Hole] in Scene Mode.
• The Extended Optical Zoom cannot be used in the following cases:
– In Macro Zoom Mode
– In [Transform], [High Sens.], [Hi-Speed Burst], [Flash Burst], [Pin Hole] or
[Photo Frame] in Scene Mode
– In Motion Picture Mode
• [Digital Zoom] cannot be used in the following cases:
– In [Transform], [High Sens.], [Hi-Speed Burst], [Flash Burst], [Pin Hole], [Film Grain] or
[Photo Frame] in Scene Mode
– In Intelligent Auto Mode
Touch [F].
Zoom lever is displayed on the LCD monitor.
Touch [H] or [G].
• Zoom position will move to [W] end or [T] end.
To stop halfway, touch again.
• Dragging the icon in the center can zoom
adjusting the speed. ([L]: Slow, [H]: Fast)
• Zoom lever will disappear when no operation
is performed for approximately 5 seconds.
A Zoom speed adjustment
B Zoom to the edge
Advanced (Recording pictures)

Zooming with touch operation

- 50 -
(P57) for
B
A