Table of Contents
Advertisement
5. Maintenance and care
General information
• Clean the appliance thoroughly after each use,
making it easier to remove cooking residues and
helps prevent these from burning on the next use
of the appliance.
• Wipe down the cabinet, door, control panel, trims
and handles with a damp, hot soapy cloth.
• Use only liquid household cleaners and avoid
abrasive powders, scouring pads and caustic
cleaners.
• Rinse and wipe down with a clean cloth.
Cleaning the oven
• Open the oven door and allow the oven to cool
down.
• Clean the oven with a damp, hot soapy cloth. Do
not use a steam cleaner.
• It may be necessary to soak burnt soils with a
liquid cleaner to soften them before scrubbing
them with a nylon brush or scouring sponge.
• Heavy soils on the bottom of the oven may require
overnight soaking under a sponge liberally
sprinkled with household ammonia. Remove the
soil the following morning by washing normally.
• Always ensure that any excess liquid is thoroughly
wiped off after cleaning and any spillage is
immediately wiped dry.
• Do not use cleaning agents that contain acid or
chloride to clean the stainless or inox surfaces and
the handle. Use a soft cloth with a liquid detergent
(not abrasive) to wipe these parts clean, paying
attention to sweep in one direction.
• For your convenience, the shelves may be
removed to improve access.
DANGER Risk of
electric shock! Switch
off the electricity before
cleaning the appliance
to avoid an electric
shock.
DANGER Hot surfaces
may cause burns!
Allow the appliance to
cool down before you
clean it.
Page 21
The surface may get damaged by
some detergents or cleaning materials.
Do not use aggressive detergents,
cleaning powder/cream or any sharp
objects. Do not use any harsh abrasive
cleaners or sharp metal scrapers to
clean the oven door and glass since
they can scratch the surface, destroy
the glass and could result in the glass
shattering.
Future Transportation
• Keep the appliances original carton and transport
the appliance in it. Follow the instructions on the
carton. If you do not have the original carton, pack
the appliance in bubble wrap or thick cardboard
and tape it securely.
• To prevent the wire grill and tray inside the oven
from damaging the oven door, place a strip of
cardboard onto the inside of the oven door that
lines up with the position of the trays. Tape the
oven door to the side walls.
• Do not use the door or handle to lift or move the
appliance.
Steps carried out during the removal
process should be carried out in
reverse order to install the door. Do not
forget to close the clips at the hinge
housing when reinstalling the door.
Removing the upper door inner glass
The entire inner glass panel of the upper oven door
can be removed for cleaning.
1.Open the oven door.
1 Screw
2 Profile
3 Inner glass pane
4 Plastic slot
2. Using a screwdriver remove both screws (1) at the
top of the door profile (one on each side).
3. Remove the door profile and carefully take out the
glass (3).
4. When refitting the glass ensure the bottom edge of
the glass is securely placed in the plastic slots.
Refit the door profile using the screws.
Advertisement
Table of Contents
