Hyundai HYSSAC26PWA User Manual page 15

Add device
There are 4 methods to add the device.
4-Auto-scan mode
1. Power on the indoor unit, no need to launch the air condi�oner.
2. Click "+" in the upper right corner of the "Home" screen or tap "Add device".
3. Select "Auto Scan" op�on on the top right hand corner of the screen. Press "Enable Wi-Fi" or
"Enable Bluetooth" or both bu�on to launch the connec�on procedure.
4. Press the "Display" bu�on on the remote controller 6 �mes within 8 seconds un�l the
device beeps twice and the indoor unit display shows "CF" code. The app will start auto-scanning.
Once the searching is completed you should see the air condi�oner found and appearing as "Available
devices found". Press "Next".
5. Input the password of the Wi-Fi which is the same as your smart phone connected, then tap "Next".
6. The connec�ng of the device will start.
7. Once the connec�on is completed, you device will appear on the screen. Press Done bu�on to
complete the process.
******
******
14
Rename
the
device