Stalwart STM-3003 Instruction Manual

Long working distance stereo microscope

STM-3003 Long Working Distance Stereo

Microscope

Instruction Manual

Please read the manual before using the microscope.

Contents:

I, The applications

II, Names of the parts, components and accessories

III, Major technical parameters

IV, How to use

V, Lamp & fuse replacement

VI, Maintenance and general care of your microscope

VII, Optional accessories

I, Applications:

Widely used in electronics industry, assembling and inspection of precise

instruments and meters, educational experiments, observation and research. It

can be used in the schools, research institutes, factories and families to study

the geology, out appearance of objects.

II, Names of the parts and accessories:

Base, fixing block, sliding stand, pole, hand clamp, incident illuminator,

Eyepieces, diopter adjustment ring, prism housing, objective, power switch.

Table of Contents

Need help?

Do you have a question about the STM-3003 and is the answer not in the manual?

Page 1 STM-3003 Long Working Distance Stereo Microscope Instruction Manual Please read the manual before using the microscope. Contents: I, The applications II, Names of the parts, components and accessories III, Major technical parameters IV, How to use V, Lamp & fuse replacement...
Page 2 Incident light Illumination cable Eyepiece Fastening knob Prism housing connector Holder Horizontal pillar Objective case Pillar Switch Connect spanner Power cable Focusing knob Base III, Major technical parameters: 1, optical parameters: Field scope, Working distance 230mm 2, electrical parameters: input voltage: 220V 50Hz or 110 60Hz(optional) Illumination types: 1), natural light 2), The illumination coming from the source of a ball shaped lamp(A/C 12V/10W or 6V/6W) through the condenser,...
Page 3 3, One pair of rubber eye guards is contained inside the packing. They are used to prevent the extra light from entering the eyepieces, to improve visibility. 4, Focusing, diopter, inter-pupillary adjustments: Place a specimen onto the stage. Loose the body locking thumb screw and hold the microscope head and move the body up and down to fix it at the estimated working distance.
Page 4 VII, Optional parts: 1, Eyepieces: WF5×/20mm, WF15×/15mm, WF20×/10mm 2, Objectives: 0.5X, 1.0X...