Techpro CVIPTZ-EL2L12X User Manual page 23


PAN SPEED: Set dome rotation speed. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.

CALL: Move the cursor to CALL item and then click confirm button. The dome begins 360 degrees
continuous rotation.

STOP: Highlight stop item and then click confirm button. The dome stops rotation.

BACK: Go back to previous menu.

EXIT: Log out system menu.
3.4.4.3 Auto Scan
Move the cursor to SCAN button and then click confirm button.

AUTO SCAN NO：Here is to set auto scan number. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.

SET LEFT LIMIT：Here is to set camera left address. Click confirm button to save current setup.

SET RIGHT LIMIT：Here is to set camera right address. Click confirm button to save current setup.

SCAN SPEED: Please use the left/right button on the keyboard or in the speed dome terminal menu
to set.

CALL: Please input auto scan number first, and then please move the cursor to CALL and click
confirm button to activate auto scan function.

STOP: Here is to terminate auto scan function.

BACK: Go back to previous menu.

EXIT: Log out system menu.
3.4.4.4 Auto Tour
Move the cursor to highlight TOUR item and then click confirm button to go to set interface.

TOUR NO ：Here is to ser tour number. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set.

TOUR SETTING: Move the cursor to TOUR setting item and then click confirm button. You can see
the following interface. Here you can add or remove the preset, and set the corresponding dwell
time and call speed.
AUTO SCAN NO
SET LEFT LIMIT
SET RIGHT LIMIT
SCAN SPEED
CALL
STOP
BACK EXIT
Figure 3-22 Auto scan setting
： 1
TOUR NO：
TOUR SETTING
DELETE TOUR
CALL
STOP
BACK EXIT
Figure 3-23
Figure 3-24 Tour setting
NO PRESET DWELL
01 000 005
02 000 005
03 000 005
... ... ...
32 000 005
BACK EXIT
16
： 1
：5
SPEED
013
013
013
...
013