Display Setting; Camera Setting - Techpro CVIPTZ-EL2L12X User Manual

3.4.1.2 Address Information
Move the cursor to SITE INFORMATION and then click confirm button.

ADDR TYPE: There are two options: soft and hard. Please use the left/right button on the keyboard
or in the speed dome terminal menu to set.

ADDR-HARD: It is an address you set in the dial switch. You can not modify it through software.

ADDR-SOFT: You can set address via software. It is to say, you can use menu to modify dome
address.

BACK: Go back to the previous menu.

EXIT: Log out system menu.

3.4.2 Display Setting

Move the cursor to DISPLAY SETUP and then click confirm button, you can go to the third submenu.
Please use the left/right button on the keyboard or in the speed dome terminal menu to set. After
completed setup, please click save button to save current setup.

PRESET: Display dome preset title or not. Please use the left/right button on the keyboard or in the
speed dome terminal menu to set. You can go to Function Setup->Preset section to set
corresponding preset value and preset title.

AZIMUTH DISP: Display dome current coordinates or not. Please use the left/right button on the
keyboard or in the speed dome terminal menu to set.

POSITION: Display the angel between the benchmark and then current location. Please use the
left/right button on the keyboard or in the speed dome terminal menu to set.
INSIDE TEMPERATURE: Display dome internal temperature or not. There are three options: ℃

/F/Off. Please use the left/right button on the keyboard or in the speed dome terminal menu to set.

BACK: Go back to the previous menu.

EXIT: Log out system menu.

3.4.3 Camera Setting

WB SETTING
EXPOSURE SETTING
DAY/NIGHT SETTING
FOCUS SETTING
IMAGE ADJUST
ZOOM SPEED
NEXT PAGE
BACK
Figure 3-7 Camera setting
ADDR TYPE
ADDR-HARD
ADDR-SOFT
BACK
Figure 3-5 Address information
：ON
PRESET TITLE
：ON
AZIMUTH DISP
：OFF
POSITION
：℃
INSIDE TEMP
BACK EXIT
Figure 3-6 Display setting
：8
EXIT
：HARD
：1
：0
EXIT
APERTURE
APERTURE RESTRAIN
DIGITAL ZOOM
PICTUER FLIP
LENS INITIALIZATION
PICTURE MODE
NEXT PAGE
BACK
Figure 3-8 Next page
9
：9
：10
：OFF
：OFF
：720P/25
EXIT