Function Setting - Techpro CVIPTZ-EL2L12X User Manual


GAMMA: It is to set picture gamma. It includes the fourth menu. Move the cursor to current item an
then click confirm button to go to the submenu.

CONTRAST: It is to set picture color contrast. Please use the left/right button on the keyboard or in
the speed dome terminal menu to set.

STYLE: It is to set video style. Please use the left/right button on the keyboard or in the speed dome
terminal menu to set.

BACK: Go back to previous menu.

EXIT: Log out system menu.

3.4.4 Function Setting

PRESET
AUTO PAN
AUTO SCAN
AUTO TOUR
PATTERN
IDLE MOTION
NEXT PAGE
BACK
Figure 3-18 Function setting
Please go back to main menu and move the cursor to FUNCTION SETTING, click confirm button. You
can see the above interface.

PRESET: It is to set preset. Move the cursor to PRESET and then click confirm button to go to the
third submenu.

AUTO PAN: It is to set pan. Move the cursor to AUTO PAN and then click confirm button to go to
the third submenu.

AUTO SCAN: It is to set scan number, speed and etc. Move the cursor to AUTO SCAN and then
click confirm button to go to the third submenu.

AUTO TOUR: It is to set tour number, tour operation and etc. Move the cursor to AUTO TOUR and
then click confirm button to go to the third submenu.

PATTERN: It is to set pattern number and etc. Move the cursor to AUTO PATTERN and then click
confirm button to go to the third submenu.

IDLE MOTION: It is to set idle operation, idle time and etc. Move the cursor to IDLE MOTION and
then click confirm button to go to the third submenu.

NEXT PAGE: It includes: PRIVACY MASK, PTZ SPEED, SET ZERO, POWER UP and etc. Move
the cursor to the item and then click the confirm button to set.

PRIVACY MASK: Here you can set the privacy mask number and etc. It includes the third menu.
Please move the cursor to the current item and then click the confirm button to go to the next
interface.

PTZ SPEED: It is to set PTZ speed. Please use the left/right button to set.

SET ZERO: Please move the PTZ to the horizontal coordinates, click OK button to confirm.

POWER UP: It is to set the PTZ action when the speed dome boots up. Click the confirm button to
go to the next interface to set.

MENU PASSWORD: It is to set menu password. Move the cursor to MENU PASSWORD and then
click confirm button to go to the next submenu to set.
PRIVACY MASK
PTZ SPEED
SET ZERO
POWER UP
MENU PASSWORD
MENU IDLE
PTZ AUTO STOP
EXIT BACK
Figure 3-19 Next page
14
：2
：1M
：15S
EXIT