Page 1
2937207AU EDGER HEAD OPERATOR MANUAL Greenworks Australia A Division Jak Max P/L 380 Foley’s Road Derrimut Victoria, Australia 3026 PAC458 www.greenworksaustralia.com...
English Unpack the machine.......... 6 Description......... 2 Assemble the shaft..........6 Introduction............2 Operation........... 7 Purpose.............. 2 Overview............2 Adjust the depth of cut........7 Replace the blade..........7 General power tool safety Operation tips............ 7 warnings..........2 Maintenance........8 Training..............2 General information...........8 Preparation............2 Clean the machine..........
English DESCRIPTION GENERAL POWER TOOL SAFETY WARNINGS INTRODUCTION WARNING Your product has been engineered and manufactured to high Read all safety warnings and all instructions. Failure to standards for dependability, ease of operation, and operator follow the warnings and instructions may result in electric safety.
English off the power tool and remove mains, remove the disabling the battery immediately. Do device or removable battery) not use the power tool if the • whenever the power tool is battery is damaged or worn. left unattended; • Before use, always visually •...
English power tool repaired only by an • Do not overreach. Keep proper authorized repairer. footing and balance at all times. This enables better • When not in use, store the control of the power tool in power tool out of the reach of unexpected situations.
English the mains and the moving • Need for daily inspection hazardous parts have come to a before use and after dropping complete stop. Never to or other impacts to identify replace the non-metallic any significant defects. cutting means with metallic SYMBOLS ON THE PRODUCT cutting means.
English UNPACK THE MACHINE Symbol Explanation Direction of rotation. WARNING Make sure that you correctly assemble the machine before use. RISK LEVELS WARNING • If parts of the machine are damaged, do not use the The following signal words and meanings are intended to machine.
English OPERATION REPLACE THE BLADE NOTE IMPORTANT If the blade worn out, replace it with a new one (not Before you operate the machine, read and understand the provided). safety regulations and the operation instructions. 1. Use a metal rod (4) to fix the blade. WARNING 2.
English • Edger should be held at a comfortable position with the Before the maintenance operations: rear handle about hip height. • Stop the machine. • The edger will edge along sidewalks, driveways, flower • Remove the battery pack. beds, curbs, and similar areas. •...
Remove the battery pack. Greenworks website www.greenworksaustralia.com) 10.2 STORE THE MACHINE The Greenworks warranty is 4 years on the product, and 2 years on batteries and chargers (consumer/private usage) from • Remove the battery pack from the machine. the date of purchase. This warranty covers manufacturing •...
Need help?
Do you have a question about the 60V Pro Series and is the answer not in the manual?
Questions and answers