Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for GreenWorks PRO ED60L00
Summary of Contents for GreenWorks PRO ED60L00
- Page 1 EDGER OPERATOR MANUAL BORDEADORA MANUAL DEL OPERADOR ED60L00 / ED60L210...
-
Page 3: Table Of Contents
English Description........2 Start the machine........5 Stop the machine........5 Purpose............2 Adjust the depth of cut........5 Overview............ 2 Replace the blade........6 IMPORTANT SAFETY Operation tips..........6 INSTRUCTIONS......2 Maintenance........7 Symbols on the machine....3 General information........7 Risk levels........3 Clean the machine........ -
Page 4: Description
English DESCRIPTION • Always wear safety glasses with side shields marked to comply with ANSI Z87.1. Everyday glasses have only impact resistant lenses. They are PURPOSE NOT safety glasses. Following this rule will reduce the risk of eye injury. Use face mask if operating in This edger is used to trim and cut around the edge of dusty work spaces. -
Page 5: Symbols On The Machine
• Keep blades sharp. battery packs. Use of any other battery packs may SAVE THESE INSTRUCTIONS create a risk of injury and fire. Use only Greenworks Pro 60v batteries. SYMBOLS ON THE MACHINE • Recharge only with the charger specified by the manufacturer. -
Page 6: Service
English WARNING SYM- SIGNAL MEANING If the battery pack cracks or breaks, with or without leaks, do not recharge it and do not use. Discard it DANGER Indicates an imminently and replace with a new battery pack. DO NOT TRY hazardous situation,which, TO REPAIR IT! To prevent injury and risk of fire, if not avoided, will result in... -
Page 7: Install The Battery Pack
English REMOVE THE BATTERY PACK 1. Push and hold the battery release button (1). 2. Remove the battery pack from the machine. OPERATION IMPORTANT Before you operate the machine, read and understand the safety regulations and the operation instructions. 3. Set the auxiliary handle in the most comfortable in WARNING use position. -
Page 8: Replace The Blade
English 5. Standing in a normal working position, check the depth of cut again and correct if necessary. 6. Replace the battery pack once all adjustments are Loosen complete. Tighten OPERATION TIPS Wheel WARNING Always hold the edger away from the body keeping clearance between your body and the edger. -
Page 9: Maintenance
English • Keep the trimmer head free of grass, leaves, or excessive grease. • Keep the air vents clean and free of debris to avoid overheating and damage to the motor or the battery. • Do not spray water onto the motor and electrical components. -
Page 10: Transportation And Storage
English TROUBLESHOOTING Problem Possible Cause Solution The ma- No electrical 1. Remove battery chine does contact between pack. not start the machine and 2. Check contact and when you the battery pack. install the battery pack push the again. trigger. The battery pack Charge the battery is depleted. -
Page 11: Limited Warranty
YEAR/AÑOS TOOL WARRANTY GARANTÍA DE LA HERRAMIENTA Greenworks hereby warranties this product, to the original purchaser with proof of purchase, for a period of four (4) years against defects in materials, parts or workmanship. Greenworks, at its own discretion will repair or replace any and all parts found to be defective, through normal use, free of charge to the customer. -
Page 12: Exploded View
Qty Description C1100234-00 KIT, BATTERY PACK 311081782 KIT, GUARD HOUSING 311031782 KIT, HANDLE C1100358-00 KIT, MOTOR HEAD 311161418B KIT, AUXILIARY HANDLE 333031782 BLADE 311051782 KIT, SHAFT 339011418 WASHER 311121782 KIT, WHEEL 32201420 Greenworks Tools PO Box 1238 Mooresville, NC 28115...
Need help?
Do you have a question about the PRO ED60L00 and is the answer not in the manual?
Questions and answers