Advertisement
TRANSMITTER PRODUCT BREAKDOWN
1. Power LED (Red) : The red power LED is on the transmitter has power.
2. Link LED (Green) : Link LED is on, the transmitter and receiver have a good connection.
When it's off the units are not connected.
3. EDID DIP switch : See EDID section for settings.
4. Micro USB : Firmware port
5. HDBaseT out : HDBT signal output port.
6. Data Signal LED (Yellow) : Solid -HDMI signal with HDCP. Flashing-HDMI signal without
HDCP. OFF - No HDMI signal
7. Link LED (Green) : Link LED is on, the transmitter and receiver have a good connection.
When it's off the units are not connected.
8. HDMI INPUT : For connecting Source
9. USB Host : For connecting PC USB
10. USB HUB : USB A Female ports for client / remote devices.
11. Audio out : 3.5mm Analog audio jack, De-embedding HDMI audioDL-1
12. RS232 : Phoenix connector, pass through to Rx RS232.
13. Power Port : DC 24v, only one side needs power.
3
OWNERS MANUAL DL-1H1A1UB-H3
Advertisement
