Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for COMHOMA H7137-KD
Summary of Contents for COMHOMA H7137-KD
- Page 1 RECLINER CHAIR H7137-KD...
- Page 2 ➊...
- Page 3 The backrest & seat cover you received has been vacuum-packed. Open the plastic bag, take out the backrest / seat cover, let it breathe to the normal state. �� �� �� Iron Frame Decorative Sleeve R&L ＊2pcs �� Seat Base＊1pc ��...
- Page 4 �� �� �� Metal Frame ＊4pcs �� Cup Holder ＊2pcs �� Metal Pipe ＊14pcs �� Screw M6*125＊14pcs �� Screw M6*20＊8pcs �� M6 Wrench ＊1pc �� �� �� Please check and ensure all the things are in the package. Please contact us if something is not included. We will reply within 24 hours and try our best to solve it.
- Page 5 assemble the chair. �� �� �� Carefully unpack and place parts on a clean flat surface. Insert the M6x125 screw into the metal pipe ��, thread the screw out of the metal pipe �� and align �� it with the holes of the two sides of the iron frame R ��, and install the metal pipe ��...
- Page 6 �� �� �� �� Refer to step 2 to install the iron frames L. *NOTE：DO NOT tighten the screws completely until all the screws are fixed in the correct position. �� Cover the iron frame decorative sleeve L �� on the iron frame L. ��...
- Page 7 �� Fasten the Velcro of the Iron Frame Decorative Sleeve L ��. �� �� Refer to step 4 and step 5 to install the iron frame Decorative Sleeve R ��. ➏...
- Page 8 �� Cover the iron frame L with the �� Armrest Cover L. *NOTE：After the �� is installed in place, zip up the �� Armrest Cover L as shown. �� Cover the iron frame R with the �� Armrest Cover R. *NOTE：After the ��...
- Page 9 �� �� �� Install the cup holders into the armrests on both sides. �� Attach the metal frames �� to the armrest L & R with screws M6x20 ��. *NOTE：Place the wide side of the �� metal frames upward for installation. If the position is incorrect, these parts cannot be properly snapped into the seat‘s metal frames.
- Page 10 After connecting the power cords, plug in the power �� source. press the Recline & Legrest button of the hand control to expand the footrest �� separetely. �� Recline & �� Footrest �� �� Hand Control �� Fold the seat cover twice, ��...
- Page 11 ❶ ❷ Align the position before Flip the hook, loop at the ❶ ❷ pasting, make sure the pasted middle of the seat cover and position is aligned. paste it with the seat base. Flip and extend the seat cover to the ��...
- Page 12 Press once the RST button to restore the chair state. Align and paste the Velcro on the outside of the seat base �� in sequence. �� frame �...
- Page 13 Insert metal frames of parts v （both）to the backrest. Ensure they are put correctly. �...
- Page 14 wires �� �...
- Page 15 Complete. �...
- Page 16 Recline & Footrest once Press the RST once 4. Note：Press the Recline & Legrest or RST button once. Do not hold it all the time to avoid damage to the recliner motor. �...
-
Page 17: Ambient Light
Ambient Light Light Switch 1. Press the Ⓜ light switch once to turn on the ambient light (blue) under the footrest. 2. Press the Ⓜ light switch once again to turn off the ambient light. �... - Page 18 PULSE,PRESS, WAVE,AUTO,NORMAL You can use massage part to enjoy. (LUMBAR) �...
- Page 19 �...
- Page 20 As all action products contain moving parts, handle all items with care. * Only move the recliner when it is in the ‘upright’ or ‘closed’ position. Never attempt to move the recliner when it is in any of the open positions. Always use the arms to move the Reliner –...
- Page 21 ⓴...
Need help?
Do you have a question about the H7137-KD and is the answer not in the manual?
Questions and answers