Palm V Getting Started page 2

Charge your Palm V
Before you use your new Palm V™ organizer, you need to connect the cables and
charge it for three hours. Afterwards, it takes only a few minutes a day to recharge
it during regular use.
1.
Insert the AC adapter cable
into the back of the cradle connector,
and then turn off your computer.
2.
Connect the cradle to a COM
(serial) port on your computer, and then
plug the AC adapter into a wall outlet.
3.
Charge your organizer by placing
it in the cradle and making sure the
cradle light is on. As your organizer
begins its 3-hour charge, you can
continue with the set up process.
™
connected organizer
If necessary, use the included
serial port adapter.
Cradle light