Using Auto Power-On; Powering Off The Projector - Compaq iPAQ MP1200 User Manual

Compaq user's guide ipaq microportable projector mp1200

Hide thumbs Also See for iPAQ MP1200:

Table of Contents

Using Auto Power-On

The projector can be set to turn on automatically whenever a valid

signal is detected from an input source. This feature is disabled

for shipping. To enable it, use the Input Source Select menu item

in the On-Screen Display menu. Refer to Chapter 3, "Using the

On-Screen Display Menu," for more information.

1. Press the

projector lamp.

The message "Going to Standby" displays and the LED on

the

CAUTION:

45 seconds) before turning the projector back on. Failure to follow this

caution can result in damage to the projector.

2. Once the

disconnect the power cord from the electrical outlet and the

projector 2 .

Compaq iPAQ Microportable Projector MP1200 User's Guide

Power/Standby

Wait until you see a steady amber LED (approximately

Power/Standby

button 1 to turn off the

button blinks amber.

LED has turned steady amber,

Using the Projector

2–7

Table of Contents