Battery And Service Info; Wheel Size Settings - Promovec Display Graphic D400+ Quick Start Manual

BATTERY AND SERVICE INFO

Further information is found under "info" about:
• Battery: Remaining power and state of health, displayed in percentages
• Service: The latest system error code and the firmware version on both the
controller and the display

WHEEL SIZE SETTINGS

Setting wheel size
1. Press "Menu" down until the main menu is displayed
2. Go to "Bike Settings" with "Up" or "Down" - Select with "Menu"
3. Go to "Wheel Size" with "Up" or "Down" - Select with "Menu"
4. Adjust the value with "Up" or "Down" to match the circumference of the wheel, press
"Menu" to save. Now the speed is calculated correct
5. Return to the main display by pressing the "Menu" button down in 2 seconds or by
selecting the "back" arrow in the display with "Menu"
The speed display can be adjusted by changing the wheel size. The wheel size is found
by measuring the inner circumference of the tyre or by reading the numbers on the
side of the tyre. (Check the table below for reference)
TO (European Tyre and Rim Technical Organization):
ETRTO DÆK
40-406 20x1.50
47-406 20x7.75
50-406 20x1.95
47-507 24x1.75
50-507 24x2.00
54-507 24x2.125
40-559 26x1.50
47-559 26x1.75
50-559 26x1.95
PAGE 6
LÆNGDE ETRTO
1490 54-559
1515 35-622
1565 38-622
1890 40-622
1925 42-622
1965 44-622
2010 45-622
2023 47-622
2050
Valve
DÆK LÆNGDE
26x2.10 2068
700x35C 2168
700x38c 2180
700x40c 2200
700x42c 2224
700x44c 2235
700x45c 2242
700x47c 2268