Baltic ELITE User Manual page 12

ENGLISH
REARMING BALTIC ELITE AUTOMATIC VERSION
Unscrew the used capsule anticlockwise
1.
label by the inflation mechanism. Replace the capsule if it has been activated or if it has
passed its expiry date
2015 means it must be replaced before February 2015.
Refit the examined capsule if ok, if not screw in a new capsule clockwise and tighten it by
2.
hand until no threads are visible. The lower indicator window on the valve head should now
be green.
Unscrew the CO
3.
manner. Check that the lever and the pin (visible at the bottom of the valve head next to the
CO cylinder's fastening)
2
the lever and secure it by pressing it against the valve head until it clicks into place.
Visually check that the O-ring in the bottom of the valve head, next to the CO
4.
fastening, is undamaged
Screw in a new, clean and unpierced CO
5.
Use no tools.
When both capsule and CO
green.
REARMING BALTIC ELITE MANUAL VERSION
Unscrew the CO
1.
manner. Check that the lever and the piercing pin (visible at the bottom of the thread for the
CO cylinder
12
2
and secure it by pressing it against the valve head until it clicks into place.
Visually check that the O-ring in the bottom of the valve head, next to the CO
2.
fastening, is undamaged
Screw in a new, clean and unpierced CO
3.
Use no tools.
When the CO
REPACKING
BEFORE REPACKING
Follow these instructions carefully.
•
Repacking must be carried out with dry hands, in dry surroundings and without tools.
•
Place the inflatable lifejacket, back downwards, on a flat surface
•
Make sure the lifejacket is deflated and the mouth inflation tube's cap is in the normal posi-
•
tion and the indicators show green
, which is stamped on the side of the capsule. For example, 02
10
cylinder clockwise. Discard the cylinder in an environmentally friendly
2
11:1 can move freely, by pulling on the activating cord. Fold back
.
11:2
cylinder are mounted correctly, both indication windows should be
2
cylinder clockwise. Discard the cylinder in an environmentally friendly
2
11:1 can move freely, by pulling on the activating cord. Fold back the lever
.
11:2
cylinder is mounted correctly, the indicator window should be green.
2
9 . Follow the illustrated instructions on the
cylinder using only hand force until absolutely tight.
2
cylinder using only hand force until absolutely tight.
2
, .
6 7
cylinder's
2
cylinder's
2
12 .