Dell Latitude 7340 Service Manual page 70

Table 6. System setup options—Storage menu
Storage
SATA/NVMe Operation
SATA/NVMe Operation
Storage Interface
Port Enablement
SMART Reporting
Enable SMART Reporting
Drive Information
Table 7. System setup options—Display menu
Display
Display Brightness
Brightness on battery power
Brightness on AC power
Touchscreen
Full Screen Logo
Table 8. System setup options—Connection menu
Connection
Wireless Device Enable
WWAN/GPS
WLAN
Bluetooth
Contactless smart card/NFC
Enable UEFI Network Stack
Wireless Radio Control
70 BIOS setup
Set the operating mode of the integrated storage device controller.
By default, the RAID On option is enabled.
This page allows you to enable the onboard drives.
By default, the M.2 PCIe SSD option is enabled.
Enable or disable Self-Monitoring, Analysis, and Reporting Technology
(SMART) during system startup.
By default, the Enable SMART Reporting option is not enabled.
Enable to set screen brightness when the system is running on battery power.
Enable to set screen brightness when the system is running on AC power.
Enable or disable Touchscreen.
By default, the option is enabled.
NOTE: This option is available only for systems that support touchscreen.
Enable or disable full screen logo.
By default, the option is not enabled.
Enable or disable the internal WWAN/GPS device.
By default, the option enabled.
Enable or disable the internal WLAN device.
By default, the option enabled.
Enable or disable the internal Bluetooth device.
By default, the option enabled.
Enable or disable the internal Contactless smart card/NFC device.
By default, the option enabled.
NOTE: This option is available only for systems that support Contactless
smart card/NFC.
Enable or disable UEFI Network Stack and controls the on-board LAN
Controller.
By default, the Enable UEFI Network Stack option is enabled.