Page 2
This device corresponds to requirements stipulated in 90/384/EEC and features radio interference suppression in compliance with valid EC Regulation 89/336/ EEC. Note: The displayed value may be adversely affected under extreme electromagnetic influences, eg. when using a radio unit in the immediate vicinity of the device.
The load cells used in all Ohaus Scale Bases are made of aluminum and are of a single point, bending beam design. These scale bases are designed to interface with Ohaus electronic indicators and work with other compatible indicators as well.
CAUTION CAUTION Remove the shipping screws located on the top and bottom of the Ohaus Scale Remove the shipping screws located on the top and bottom of the Ohaus Scale Remove the shipping screws located on the top and bottom of the Ohaus Scale...
SPIRIT LEVEL REMOVE 4 SHIPPING SCREWS AND TAGS ON BOTTOM LEVELING FOOT WITH LOCKING NUT 12" x 12" and 18" x 18" Ohaus Scale Base (Platform Removed) PHILLIPS PAN HEAD SHIPPING SCREW SPIRIT LEVEL (TOP AND BOTTOM) LEVELING FOOT WITH LOCKING NUT 24"...
CARE AND MAINTENANCE CARE AND MAINTENANCE To keep the Ohaus Scale Base operating properly, it should be kept free from foreign materials. If necessary, a cloth dampened with water and a mild detergent may be used to clean models with a P or S suffix. Models with an AS suffix may be washed down with a hose.
SERVICE INFORMATION SERVICE INFORMATION SERVICE INFORMATION SERVICE INFORMATION SERVICE INFORMATION For service assistance in the United States, please call Ohaus Corporation toll-free at (800) 526-0659. An Ohaus Product Service Specialist will be available to help you. SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS SPECIFICATIONS...
Need help?
Do you have a question about the B10P and is the answer not in the manual?
Questions and answers