Use - Olimpia splendid CALDO RELAX Instructions For Use And Maintenance Manual

• Leave at least 1m of free space on the sides, behind the appliance and above it (fig. 1).
• Make sure the knob (7) is set to "O".
• Connect the plug to the power socket.
• Make sure the mains data correspond to
what is described on the data plate of the
appliance.
• Arrange cord away from traffic areas so
that it will not be tripped over.

3 - USE

Knob "7"
• Knob set to "O" :
• "VENTILATION" function :
• "MINIMUM POWER" function :
• "MAXIMUM POWER" function :
Knob "8" - Thermostat
• Start the appliance by rotating the knob (7) to "
• To set the room temperature to a specific value (thermostatation), rotate the knob
"8" clockwise until it stops.
• Once the desired temperature of the room has been reached, slowly rotate the
knob "8" anticlockwise until the appliance switches off.
• At this point, the appliance will reactivate automatically when the room temperature
lowers beyond the set limit and will switch off again once the room temperature
reaches the set value.
8
appliance OFF
rotate the knob to "
rotate the knob to "
rotate the knob to "
7
" position.
•
" position.
• •
" position.
• • •
" position or to "
CALDO RELAX
" position.
EN - 9