Honeywell HR 10 F Mounting And Operation Instructions page 28

Adapting
Activating manual adaptation
The manual adaptation can be used to solve various problems:
• If the radiator does not turn cold (valve does not close completely).
• If the
symbol is displayed (no adaptation possible).
• If the
symbol is displayed (valve lift too short or motor cannot
be moved).
Remove the batteries from the battery compartment.
►
Separate the housing of the drive unit from the valve lantern, as
►
described on Page 5.
Turn the blue adjusting ring towards the minus sign until the radiator
►
valve is closed (please also refer to Page 8).
The radiator turns cold.
Place the drive unit back onto the valve lantern.
►
Insert the batteries again while pressing the
►
is displayed.
to
The radiator controller carries out the manual adaptation.
If you want to activate automatic adaptation again:
Repeat the above operating step.
►
26
are displayed consecutively.
button until