2Hab=?A; About This Guide; How This Guide Is Organized - Compaq DLT User Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2HAB=?A

About This Guide

This user guide provides information for installing, configuring, operating and
cleaning the Compaq DLT Drive. For instructions on using the DLT Drive,
please refer to the manual that came with your drive.

How This Guide is Organized

Chapter 1, "Introduction," provides an overview of the DLT Drive and
installation requirements.
Chapter 2, "Installing an Internal DLT Drive," provides instructions for the
installation of the Compaq DLT Drive in Compaq servers.
Chapter 3, "Connecting an External DLT Drive," provides instructions for the
installation of the Compaq DLT Drive as an external unit.
Chapter 4, "Installing the Software Drivers," covers procedures for the
installation of software drivers to complete the drive installation.
Chapter 5, "Tape Drive Operations," provides instructions for operating the
DLT Drive efficiently.
Chapter 6, "Tape Drive Cleaning," describes the cleaning procedure.
Chapter 7, "Troubleshooting," provides suggestions for problem solving
before and after tape drive installation.
Appendix A,"Power Cord Requirements," provides the power cord
set requirements.
Appendix B, "Electrostatic Discharge," provides information on avoiding
electrostatic damage and suggestions for grounding methods.
Appendix C, "Getting Help," has additional information on the Compaq
Forum of CompuServe and QuickFind.
Appendix D, "Supplemental Information About SCO UNIX," covers SCO
UNIX configuration requirements and using Legato under SCO UNIX.
Appendix E, "Regulatory Compliance Notices," contains the compliance
statements from the various worldwide agencies regulating this product.
Writer:
Jim Belew About This Guide
Project:
C-PREF.DOC
File Name: Last Saved On:
185292.002 final
Comments:
3/13/97 7:35 AM
LEE
Compaq DLT Drive User Guide