Sunnydaze Decor GF-291 Assembly Manual

Read this manual carefully before using this product. Save this manual for future reference.
Assemble components on a soft, clean surface to avoid damaging the finish.
Tip: Always fully insert the hex key inside designated notch of the bolt.
If the hex key is not fully inside the notch, the hex key could slip out,
causing damage to the bolt head. Repeated hex key slipping will cause
the notch to become rounded, making it difficult or impossible to tighten
the bolt with the hex key.
GF-WKD 32
Purchase Date:
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
customerservice@sunnydazedecor.com, or via our contact us page at
SQUARE TOP TABLE
/ / Order/Customer Reference Number:
GF-291
10/2021
https://tiny.cc/SunnydazeWarranty
https://tiny.cc/SunnydazeContact
Ensure all parts are
accounted for before
disposing of packaging.
No. Parts
A
B
No. Hardware
1
2
3
WARNING
CHOKING HAZARD — This item contains
small parts that can be swallowed. Keep
children and pets away during assembly.
Qty.
Tabletop 1
Leg 4
Qty.
M6x20mm Bolt 8
M6 Washer 8
M4 Hex Key 2
Page 1 / 2