Table of Contents
Advertisement
1 ABOUT THIS DOCUMENT
1.1 OBJECTIVE
This manual has every single information about the device and shall answer all questions involving
it. Here is gathered all information about mounting, setups, connections and placement of the
safety relay and its appendages. With safe operation in mind, this document ensures safety if
read and followed in its fully.
1.2 AUTHORISED PERSONNEL
Only trained and qualified personnel are authorized to operate, handle and set the device onto
its proper panel.
It is highly important to ensure the operator read and understood the content of this manual
before handling with this device.
1.3 SYMBOLS USED IN THIS MANUAL
There will be used three identical symbols but with different writings to identify them from
each other.
WARNING!
Imminent danger. It is the highest at the notification scale and requires the
maximum regard.
CAUTION!
Normal danger. It means a medium threat, not as dangerous as a "warning" but
bigger than a simple "attention".
ATTENTION!
Advisory notice. Used as a simple notification that requires a little more care.
1.4 APPROPRIATE USE
This device was developed for safety related usages as part of machinery, whether industrial or
not. It is the responsibility of the manufacturer of the machinery to ensure the proper functionality
of the safety device.
Be aware of using the device according to the application usage detailed on the next chapters.
1.5 EXCLUSION OF LIABILITY
The device's manufacturer excludes itself from the liability of bad handling or misuse which
could result into dangerous event.
It is not allowed to have the device opened or even repaired by non authorized personnel.
About this Document
CPA-D | 1-1
1
Advertisement
Table of Contents
