Breville the Tea Maker BTM800 Instruction Book page 12

USE AS A TEA MAKER
BREWING TEA
1. Remove the glass jug from the power
base and remove jug lid. When brewing
tea, fill with desired amount of water.
Ensure you do not fill past the tea
maximum mark (1200mL TEA MAX).
WARNING
Filling past the 'MAX' line may result in serious
burns or injuries as a result of overflowing hot
or boiling water. Filling below the 'MIN' line
will result in the tea maker switching off before
the water has boiled or reached the selected
temperature.
2. Place the basket on a flat, dry surface.
Remove basket lid by lifting from
the sides.
3. Use the provided tea scoop to fill the
basket with tea leaves. As a general
guide, use 1 scoop of tea leaves per cup /
250ml of water, however this will depend
on the instructions on tea packaging and
your personal preference (See page 10,
Water to Tea Scoop Ratio).
4. Replace the basket lid on top of the
basket. Ensure lid is securely snapped in
place by pressing firmly on the centre of
the lid.
12
FOR
™
5. Slide the assembled basket on to the
magnetic post located within the glass
jug. The assembled basket will attach
itself to the top of the magnetic post.
Replace jug lid.
SELECTING THE TEA TYPE
The tea type determines brew temperature.
The Tea Maker has 5 preset tea types
recommended for optimal brewing of
Green, Black, White, Herbal or Oolong tea.
It also features a customisable tea type
temperature setting for other tea varieties
or to suit your personal taste (see Page 16,
Customising Brew Temperature).
To select a preset tea type:
a) Press the TEA TYPE button and
toggle through until the desired
tea – 'Green', 'Black', 'White',
'Herbal' or 'Oolong' illuminates.
b) The LCD screen will display the preset
brew temperature recommended
for optimal brewing of the selected
tea type. This is displayed on the
left hand side of the LCD screen.