Functions - Breville the Tea Maker BTM800 Instruction Book

Functions

PREPARING THE TEA MAKER™
FOR USE
In order to remove any dust or protective
residues from the manufacturing process, it
is recommended to run a boiling cycle then
discard the water.
1. Remove and safely discard any packing
material, promotional labels and tape from
the Tea Maker™.
2. Remove the Jug Lid then remove the tea
basket from the magnetic post within the
glass jug. Wash the jug lid, tea basket,
basket lid and tea scoop in warm soapy
water with a soft sponge, rinse and dry
thoroughly.
WARNING
Never immerse the base of the glass jug, the
power base, power cord or power plug in
water or allow moisture to come in contact
with these parts.
3. Place the power base on a flat, dry surface.
4. Without the tea basket in place, fill the glass
jug to the water maximum mark
(1500mL WATER MAX) and place on the
power base. Securely fit the jug lid onto the
glass jug.
WARNING
Never fill the glass jug with chilled water.
Allow the tea maker to cool before refilling.
WARNING
Filling past the 'MAX' line may result in
serious burns or injuries as a result of
overflowing hot or boiling water. Filling
below the 'MIN' line will result in the Tea
Maker™ switching off before the water has
boiled or reached the selected temperature.
5. Unwind the power cord completely and
insert the power plug into a grounded wall
outlet.
6. The LCD screen will illuminate with the
default brew temperature and brew time
display.
7. Press the left
until the LCD screen displays 100°C.
The 'Custom' LED will automatically
illuminate.
8. Press the HOT WATER|Cancel button
to start the cycle. The button surround
will illuminate and the LCD screen will
display 'ON' and the real-time heating
progress in increments of 5°C.
9. Once the water reaches 100°C, the
tea alert will sound three times and
the HOT WATER|Cancel button
surround will cease to illuminate.
10. Discard the water. The Tea Maker™
is now ready to use.
ARROW UP button
11