Table of Contents
Advertisement
Instructions for safe use
•
Before using the camera cable or switching on the LED illumination at the camera head, please always remove
the small black protective cap at the camera head. Otherwise protective cap and camera head could be
damaged by overheating.
•
Do not use the device in areas with danger of explosion.
•
Please do not rotate the main unit while holding the camera cable or do not hardly pull the camera cable as
these could damage the cable.
•
Protect the camera cable and also the movable front part of the cable against harmful external influences.
Avoid strong drawing and bending.
•
The camera cable should not come into contact with corrosive liquids. Avoid the contact with other liquids than
water, salt water, machine oil or diesel oil, to prevent damage to the cable.
•
Avoid liquid ingress to the main unit /monitor. It could cause electric shock because the main unit is not
waterproof.
•
Do not operate or store the unit at temperatures over 60° C or under -20° C.
•
During operation the camera cable should always be flat and unrolled.
•
Do not swivel the camera head during pulling out the cable anywhere.
•
Under no circumstances may you bend the swiveling part at the front of the camera cable left/right or up/down!
2
Advertisement
Table of Contents
