Table of Contents
Advertisement
Commissioning of the inspection camera and operation with the camera cable
Press the on/off button
possible into the area which you want to inspect. You should remember that the larger the bending of the
camera cable, the smaller the possible bending angle of the camera head. That means that moving the camera
head right or left is easier with a straight camera cable. The movable end of the camera cable has different
lengths depending on the models (see table page 18). Therefore the diameter of the opening has to be not less
than 1 cm greater as the length of the movable end of the camera head). Otherwise you cannnot properly move
the camera head or it will be too close to the object to be viewed. After inserting the camera cable you should
switch on the illumination
When pulling out the camera cable please hold the movable end with the camera head as straight as possible.
(Photo has to be changed after correction of software)
•
Lock one – Only one photo or video will be protected.
•
Lock All – All photos or videos will be protected.
•
Unlock All – All photos and videos will NOT be protected..
If you select 'DELETE ' the following menu will appear.
•
One – Only one photo or video will be deleted.
•
All – All photos or videos will be deleted.
for 1-2 seconds, to switch on the main unit. Insert the camera cable as straight as
.
17
right
wrong
Advertisement
Table of Contents
