Titan TTS-S08 Series User Manual

Video endoscope with 2 or 4 way swiveling camera head

Advertisement

Quick Links

Welcome
Thank you for choosing our video endoscope
This practical tool allows you to take high resolution photos or videos..
Camera cable and camera head are water- and dustproof according to
Please read these operating instructions carefully before using the device.
Intended use
The device must not be used for medical or veterinary purposes.
Any changes or modifications not expressly approved by TITAN could void the user's authority to operate this
device.
Should the device be tampered in any matter, the warranty is cancelled and TITAN is exempt from
liability. If the warranty is still valid in case of defects or problems please send the entire device
together with all accessories wherever you purchased it or directly to TITAN. Please add a detailed
fault description.
TTS-S08.
The camera helps you to inspect inaccessible locations.
IP58/IP67.
1

Advertisement

Table of Contents
loading

Summary of Contents for Titan TTS-S08 Series

  • Page 1: Welcome - Intended Use

    • The device must not be used for medical or veterinary purposes. • Any changes or modifications not expressly approved by TITAN could void the user’s authority to operate this device. • Should the device be tampered in any matter, the warranty is cancelled and TITAN is exempt from liability.
  • Page 2: Instructions For Safe Use

    Instructions for safe use • Before using the camera cable or switching on the LED illumination at the camera head, please always remove the small black protective cap at the camera head. Otherwise protective cap and camera head could be damaged by overheating.
  • Page 3: Table Of Contents

    Contents Welcome – Intended use Instructions for safe use Contents Scope of delivery Installation Use of the extension cable – Charging the built-in battery Inserting the SD memory card Parts and their functions Basic operation - Connection sockets Connection sockets – Use as external drive – Operating modes Control buttons and their functions Camera settings in preview mode (effect) Camera settings in preview mode (date stamp) - System settings in menu mode (date and time...
  • Page 4: Scope Of Delivery

    Scope of delivery The following intems are included within the package. Please Die folgenden Gegenstände sind im Lieferumfang enthalten. Please check for completeness: A. transport case B. main unit/monitor C. camera cable /control unit D. extension cable (except for models TTS-S08-8.5HW 2W + TTS-8-8.5HW 4W) E.
  • Page 5: Installation

    Before using the camera cable for inspection or switching on the LED illumination, please always remove the protective cap at the camera head to avoid overheating damages. Installation Step 1 Connect the camera cable with the main unit. Plug in the connectors of main unit and control unit (camera cable) carefully.
  • Page 6: Use Of The Extension Cable - Charging The Built-In Battery

    Use of the extension cable between main unit and control unit You can extend the distance between main unit/monitor and control unit/camera cable by using the supplied black extension cable. First connect the extension cable to the main unit. Plug in the connectors of the main unit and of the extension cable carefully and first insert the two parts loosely into each other.
  • Page 7: Inserting The Sd Memory Card

    Inserting the SD memory card The monitor shows if an SD card is inserted or not inserted. SD card IS inserserted. SD card is NOT inserted. You have to insert a SD card, to use the photo or video function. A 8 GB card is included in the delivery scope. Please insert this card with the contacts facing upwards and in direction of the monitor (see image below).
  • Page 8: Parts And Their Functions

    Parts and their functions main unit OK button brightness battery level indicator play button camera cable connector MENU button video recording locking nut recoAufnahme up arrow key photos cable control down arrow key on/off button control unit...
  • Page 9: Basic Operation - Connection Sockets

    Basic operation Button Function Handling What happens? Press button briefly (for 1-2 sec.) to turn on/off The device can be used now. on the unit. To turn off the unit press briefly (about 2 on/off The device is now switched off. sec.).
  • Page 10: Connection Sockets - Use As External Drive - Operating Modes

    Plug in your Micro USB cable into the The main unit can be connection port. connected to other Micro USB port 2.0 devices like PC or notebook. SD card slot Insert a SD card up to 32 GB (8 GB incl.) Photos or videos are as external storage.
  • Page 11: Control Buttons And Their Functions

    Control buttons and their functions All control buttons of the main unit have, depending on operating mode, always different functions (see table below): Button Preview mode View mode MENU mode select previous function or Zoom x2, x4, x8, change screen return to the previous photo option format...
  • Page 12: Camera Settings In Preview Mode (Effect)

    Camera settings in preview mode Push the ‘MENU’ button in preview mode to display the following options for camera setting: Please always confirm your selection by pressing the‘OK’ button After that you will automatically return to the previous selection menu. If you press the MENU button again, you will leave the setting menu and return to the preview mode.
  • Page 13: Camera Settings In Preview Mode (Date Stamp) - System Settings In Menu Mode

    ‚Date Stamp‘ allows you to take pictures or videos with or without date and time stamp. If you selected ‘Date Stamp‘ there are 3 opportunities: • Off – Photos and videos are taken without date stamp. • Date – You can see the respective date on your photos or videos. •...
  • Page 14: System Settings In Menu Mode (Language Setting - Setting Tv Output)

    MM = month / DD = day/ YYYY = year / hours minutes Use the arrow keys to increase or reduce the displayed values. Use the right arrow key to change between month, day, year and time. After you made these settings, please return to back main menu by pressing the MENU button.
  • Page 15: System Settings In Menu Mode (Setting Tv Output, Energy Control Settings, Formatting Setting)

    Under `TV OUT` you can choose between two output formats: • NTSC (for America or East Asia) • PAL (for Europe) After that connect the adapter for video cable or the video cable itself to the ‘TV OUT’ port. The monitor of the main unit will show no more picture but the live images will be displayed directly on your external screen.
  • Page 16: System Settings In Menu Mode (Reset Of All Settings) - System Settings In Viewing Mode (Protect Files)

    Reset of all settings Choose ‘Reset All‘ with the down arrow and cornfirm with the OK button The function ‘Reset All‘ enables you to reset all previous settings to factory setting. • No – nothing happens and all your previous settings will remain. •...
  • Page 17: System Settings In Viewing Mode (Protect Files, Delete Files) - Commissioning Of The Inspection Camera And Operation With The Camera Cable

    (Photo has to be changed after correction of software) • Lock one – Only one photo or video will be protected. • Lock All – All photos or videos will be protected. • Unlock All – All photos and videos will NOT be protected.. If you select ‘DELETE ‘...
  • Page 18: Length Of The Movable End Of Camera Cable According To Model - Moving The Camera Cable

    Length of the movable end of camera cable according tomodel: TTS-S08-2.0 = 1,6 cm TTS-S08-2.8 = 2,4 cm TTS-S08-4.0 = 3,5 cm TTS-S008-4.0M = 3,0 cm TTS-S08-4.0IR = 3,5 cm TTS-S08-5.5 = 4,0 cm TTS-S08-6.0(D) = 5,2 cm TTS-S08-6.0IR = 4,0 cm TTS-S08-6.0UV = 4,0 cm TTS-S08-6.0W...
  • Page 19: Implementation Of The Different Functions (Short Explanation) - Cleaning Of The Camera Cable

    Implementation of the different fuctions (short explanation) Intension What to do? Buttons Symbols on the Remarks display After taking pictures the system automatically take pictures press camera switches back to preview mode. release In the upper left corner of the screen video recording press button ‘video...
  • Page 20: Cleaning Of Camera Head And Main Unit - Storage - Trouble Shooting

    • Cleaning of the camera head Hold the rigid end above the swiveling part of the camera cable (please do NOT hold at the swiveling part !) and wipe off the dirt or moisture at the camera lens with a soft, damp cloth or with a damp cotton bud. The best cleaning result you will achieve with commercial pure ethanol.
  • Page 21: Specifications (Camera, Camera Cable,) - Working Environment

    Specifications of the different models TTS-S08-2.8 TTS-S08-4.0 TTS-S08-5.5 TTS-S08-6.0(D) TTS-S08-8.5HW model number 2W or 4W 2W or 4W 2W or 4W 2W or 4W 2W or4W camera head Ф 6.0 x 27 mm camera head Ф 2.8 x 9 mm Ф...
  • Page 22: Specifications (Display & System) - Imprint

    Test standards: EMI: EN 55032:2012 + AC:2013; EMS: EN 55024:2010 Imprint This manual was published by Titan Technology GmbH, An der Feuerwache 9, D-41836 Hückelhoven (www.titan- tech.de). All rights, including translations are reserved. Any reproduction, e.g. photo-copying, microfilming or storage on electronic media requires the prior written consent of the publisher.

Table of Contents