Related Manuals for Walker Edison TNNB4C
Summary of Contents for Walker Edison TNNB4C
- Page 1 TNNB4C Assembly Instructions Please visit our website for the most current instructions, assembly tips, to report damage or request parts. www.walkeredison.com Revised 10/2022 Copyright © 2018, by Walker Edison Furniture Co., LLC, All rights reserved.
-
Page 2: General Assembly Guidelines
General Assembly Guidelines Ensure that all parts and hardware are available before beginning assembly. Follow each step carefully to ensure the proper assembly of this product. III. Two people are recommended for ease in the assembly of this product. The three main types of hardware used to assemble this product are wood dowels, screws and bolts. -
Page 3: Parts List
Parts List Description Description Part# Part# Top panel 0 pc 01 pc Drawer Left Side Base panel 01 pc Drawer Right Side 0 pc 01 pc 0 pcs Drawer front Drawer runner 0 pc 0 pc Front crossbeam Drawer bottom Right side panel 01 pc 01 pc... -
Page 4: Hardware List
Hardware List Ø8*20mm Wood dowel 04 pcs Ø8*30mm Wood dowel 30 pcs Slap hole 08 pcs Ø3,5*35mm Screw 08 pcs Ø4,0*25mm Screw 04 pcs Ø4,0*30mm Screw 12 pcs Ø4,0*40mm Screw 04 pcs Cam bolt 14 pcs Ø7,0*33mm Glue 01 pc Cam lock 14 pcs Ø15*12mm... - Page 5 Step 1 Attention to the dowel size: Ø8*20mm Ø8*20mm Insert ood dowel A and glue ( ) into part ( Step 2 Please assemble on Ø8*30mm a clean soft surface Insert wood dowel (B) and glue ( ) into to avoid damage. part (2), (6), (8), (11), (12), (23) and (24).
- Page 6 Step 4 Secure part ( s 13 ) to part ( ) and ( ) with screw ( ) and screwdriver. Ø4,0*25mm Step 5 beveled unpainted! side! Secure parts (2) and (6) to part (24). Insert cam locks (J) into part (2) (6), and tighten with a screwdriver.
- Page 7 Step 6 Secure part (23) to parts (2) and (6). Insert cam locks (J) into part (2) (6), and tighten with a screwdriver. Step 7 Secure part (1) to parts (23) and (34). Insert cam locks (J) into part (23) and (24). Tighten with a screwdriver.
- Page 8 Step 8 Secure parts (8) to part (2) with wood dowels. Step 9 Secure parts (9) x2 to part (23) and parts (8) x2 with screw (D) using the predrilled holes through (23) into parts (9). Secure parts (9) x2 to part (24) and parts (8) x2 with screw (D) using the predrilled holes through (24) into parts (9) Ø3,5*35mm...
- Page 9 Step 10 Secure part (8) to part (9) with screw (F) and screwdriver. Ø4,0*30mm Step 11 Secure part (8) to part (2) with screw (G) and screwdriver. Ø4,0*40mm...
- Page 10 Step 12 Name and address of the supplier and date of production. Secure back panel (1 ) to body with nails ( ) nd hammer. Ø * mm Step 13 Insert ood dowel ( ) into part ( ) to be the stop of the drawer. Ø8*30mm P.10...
- Page 11 Step 14 Secure part (11) and (12) to part (5) with screw (F) and screwdriver (not included). Insert part (14) and (7) between parts (11) and (12). Secure part (7) with screw (F) and screwdriver. Ø4,0*30mm Step 15 Drawer Stop Insert wood dowel (B) on the inside of the drawer, with the drawer inside the unit, after having passed the wood dowel that is in the drawer runner.
- Page 12 Step 16 Insert the slap hole C ( ) into the niche Step 17 Assembly Complete! P.12...