Qtx HIPAR-126 User Manual

HIPAR-126 Item ref: 154.325UK
User Manual
Outdoor LED PAR Can RGBWA-UV
Please read through this manual thoroughly before use, any damage
Caused by misuse of product will not be covered by warranty.
Thank you for choosing the HIPAR-126, a high-power LED PAR can fitted with 9pcs of 10W super bright 6-
in-1 COB LEDs, built into an IP65 weatherproof housing for outdoor or indoor applications. Can be
operated standalone from the internal auto programs or via DMX512 controller is more precise control is
required. Pre-wired with waterproof power and DMX signal leads for easy connection and daisy-chaining.
Supplied with split bracket which can also be used as a floor stand. Ideal solution for parties and events
where background colour wash or U/V illumination is required.
In the box:
Your HIPAR-126 should arrive with you in a single carton in good condition. The carton should contain
1 x main unit with bracket and screws, 1x remote control, 1 x UK IEC mains lead and 1 x user guide.
Warning:
To prevent risk of fire or electric shock, do not expose the unit to rain or damp environments. In the event
of a spillage, disconnect the mains and allow the unit to dry out naturally. Qualified personnel should then
check the unit before continuing use.
Please do not open cover, contains high voltage. This
product is not serviceable or repairable by the end user.
Please refer to qualified personnel for service and repair.
www.avsl.com 154.325UK User Manual