Dantel 44023 Installation & Operation Manual

About this Practice:
• This document has been
reformated to meet ISO 9001
requirements.
Reissued Practices: Updated and
new content can be identified by a
banner in the right margin.
Issue date: December 1997
Copyright 1997 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered
PABX/T
I
NTERFACE
Table of Contents
CAUTION
•
Install or remove modules from the shelf only when the power is off.
If you install a module in the shelf with the power on, the internal
circuitry may suffer damage and the product warranty will be void.
•
Remove and install circuit boards only in a static-safe environment
(use antistatic wrist straps, smocks, footwear, etc.).
•
Keep circuit boards in their antistatic bags when they are not in use.
•
Do not ship or store circuit boards near strong electrostatic, electromag-
netic, magnetic, or radioactive fields.
•
For more complete information on electrostatic discharge safety
precautions, refer to Bellcore
Printed in the U.S.A.
I
NSTALLATION
44023
RUNK
M
Technical Reference # TR-NWT-000870.
TM
& O M
PERATION ANUAL
44023-1297 <90-00058>
ODULE