Advantech ICAM-500 Series Programming Manual page 61

4.8.2.2 class DigitalOutput
class digitalio.DigitalOutput(board, dev_name)
property user_output
User set output level. This property works on op_mode is 0
Getter:
Setter:
Value:
Raises:
property op_mode
DO signal generate mode
Getter:
Setter:
Value:
Raises:
property delay_time
DO signal delay output.
Getter:
Setter:
Value:
Type:
Raises:
Read output signal level.
Set output signal level.
0: low level

1: high level

ValueError
Input value out of range.
Read DO op mode.
Set DO op mode.
0: User output DO

1: DI bypass(diabled)

ValueError
Input value out of range.
Read delay time.
SSet DO delay time.
range: [0..65535]

unit: Milli second.

int
ValueError
Input value out of range.
55 ICAM-500 Programming Guide