Maintenance And Troubleshooting - Pro-Form Sport E5.0 User Manual

Table of Contents

Advertisement

MAINTENANCE AND TROUBLESHOOTING

MAINTENANCE
Regular maintenance is important for optimal
performance and to reduce wear. Inspect and
properly tighten all parts each time the elliptical is
used. Replace any worn parts immediately. Use only
manufacturer-supplied parts.
To clean the elliptical, use a damp cloth and a small
amount of mild soap. IMPORTANT: To avoid damage
to the console, keep liquids away from the console
and keep the console out of direct sunlight.
CONSOLE TROUBLESHOOTING
If the console does not turn on, make sure that the
power adapter is fully plugged in.
If a replacement power adapter is needed, see
the front cover of this manual. IMPORTANT:
To avoid damaging the console, use only a
manufacturer-supplied regulated power adapter.
HOW TO ADJUST THE DRIVE BELT
If you can feel the pedals slip while you are pedaling,
even when the resistance is adjusted to the highest
level, the drive belt may need to be adjusted.
To adjust the drive belt, first unplug the power
adapter. Next, locate the Access Cover (29) in the Left
Shield (30). Then, remove the M4 x 16mm Screw (78)
and the Access Cover.
29
78
Next, loosen the Idler Screw (75). Then, tighten the
M10 x 55mm Screw (65) until the Drive Belt (59) is
tight.
When the Drive Belt (59) is tight, tighten the Idler
Screw (75). Then, reattach Access Cover (29) and plug
in the power adapter.
22
30
59
75
65

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Sport E5.0 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Pfel04821-int.2

Table of Contents