Advertisement
Table of Contents
HARDWARE INCLUDE :
1. 2 Anti Tip Kit
A. 4 -Small Screw
B. 4- Large Screw
C. 4-Bracket
D. 4-Retention Belt
PARTS INCLUDE :
E. 1 – Body
F. 4 – Feet
E
Body
HARDWARE :
1
2 Set
Date: 09-06-2020
CRESTINE CHEST
ASSEMBLY INSTRUCTION
PARTS :
1 PC
Anti Tip Kit
F
Feet
TOOLS NOT REQUIRED:
Screwdriver
4 PCS
Page 1 of 3
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GABBY CRESTINE
Summary of Contents for GABBY CRESTINE
- Page 1 CRESTINE CHEST ASSEMBLY INSTRUCTION HARDWARE INCLUDE : 1. 2 Anti Tip Kit A. 4 -Small Screw B. 4- Large Screw C. 4-Bracket D. 4-Retention Belt PARTS INCLUDE : E. 1 – Body F. 4 – Feet PARTS : 1 PC...
- Page 2 CRESTINE CHEST ASSEMBLY INSTRUCTION Body Feet STEP 1 Place the Chest on its back . Insert each Feet (F) into the given female receiving slots and turn the Bun Feet clockwise into place. Leveler STEP 2 - If the floor is uneven adjust the levelers located at the underside of the Feet, to do this lift Up the side that need to be elevated to provide access to the levelers, turn the leveler until adequate contact with the floor.
- Page 3 CRESTINE CHEST ASSEMBLY INSTRUCTION Wall STEP 3 Attach the Brackets (C) horizontally to the top of the back of the Chest using the Small Screws (A). Screw the remaining Brackets (C) vertically 1 inch below the brackets attached to the Chest using the large screws (B).The Large Screws (B) should be screwed into a stud in the wall.
Need help?
Do you have a question about the CRESTINE and is the answer not in the manual?
Questions and answers