Page 1
SCH-170235 CHURST CABINET ASSEMBLY INSTRUCTION HARDWARE INCLUDE : 1. 2- Anti Tip Kit A. 4 -Small Screw B. 4- Large Screw C. 4-Bracket D. 2-Retention Belt HARDWARE : Anti Tip Kit 2 Set Date: 28-7-2021 Page 1 of 3...
Page 2
SCH-170235 CHURST CABINET ASSEMBLY INSTRUCTION Hole Shelf Supports Shelf Screw Screwdriver Step 1 -To remove adjustable shelves, remove screw from shelf support, then carefully lift shelves up and out of the case.To reposition adjustable shelves, insert Stem of shelf supports into Holes in End Panel, as shown.
Page 3
SCH-170235 CHURST CABINET ASSEMBLY INSTRUCTION WALL Step 3 Attach Brackets (C) horizontally to the top of the back of the Cabinet using the Small Screws (A).Screw the remaining Brackets (C) horizontally 1 inch below the brackets attached to the Cabinet using the large screws (B).The Large Screws (B) should be screwed into a stud in the wall.