Advertisement
Table of Contents
PARTS INCLUDE :
1. 1-Body Rhett Cabinet
2. 4-Adj. Shelf
HARDWARE INCLUDE :
HARDWARE INCLUDE :
1. 8 – washer
A. 16 - Metal Supports
2. 8 – nuts
B. 16 - Screw JP.
C. 2- Anti Tip Kit
PARTS INCLUDE :
I.
4- Small Screw
A. 1 – Top
II.
4- Large Screw
B. 4 – Leg
III.
2- Bracket
IV.
2- Retention Belt
D. 1 - L Screwdriver
A.
16 pcs
Metal Shelf Supports
Date: 26-10-2018
RHETT CABINET DOUBLE
ASSEMBLY INSTRUCTION
1.
2 Set
Body Rhett Cabinet
B.
D.
1 Pc
Side Shelf Base
L Screwdriver
PARTS:
2.
Adj. Shelf
HARDWARE:
16 pcs
Screw JP.
( Tools Not Included)
4 pcs
C.
2 Set
Anti Tip Kit
Screwdriver
Page 1 of 4
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for GABBY RHETT
Summary of Contents for GABBY RHETT
- Page 1 RHETT CABINET DOUBLE ASSEMBLY INSTRUCTION PARTS INCLUDE : 1. 1-Body Rhett Cabinet 2. 4-Adj. Shelf HARDWARE INCLUDE : HARDWARE INCLUDE : 1. 8 – washer A. 16 - Metal Supports 2. 8 – nuts B. 16 - Screw JP. C. 2- Anti Tip Kit...
- Page 2 RHETT CABINET DOUBLE ASSEMBLY INSTRUCTION Remove Adjustable Shelf Right Remove Adjustable Shelf Left STEP 1 Remove Adjustable shelves from the body. STEP 2 STEP 2 Step To Install adjustable shelves, insert stem of shelf supports into holes in end panel, as shown. Rest the shelf on the shelf supports, and screw.
- Page 3 RHETT CABINET DOUBLE ASSEMBLY INSTRUCTION STEP 3 -To Reposition adjustable shelves, un-screw the shelves from shelf supports, then carefully lift shelves up and out of the case. Inserts stem of shelf supports into holes in end panel, as shown. Rest the shelf on the shelf supports, and reinstall screws.
- Page 4 RHETT CABINET DOUBLE ASSEMBLY INSTRUCTION STEP 5 Attach 2 Brackets (III) horizontally to the top corners of the Unit using the Small Screws (I). Screw the remaining Brackets (III) into the wall vertically 1 inch below the previously installed brackets using the Large Screws (II).
Need help?
Do you have a question about the RHETT and is the answer not in the manual?
Questions and answers