GABBY BURNETTE SCH-155290 Assembly Instruction

Hardware Include :
No Part
A
Flat Washer
B
C
D
E
4
2
Detail 1
4
Detail 2
Date 20-07-2019
Descrip�on
Spring Washer
KD Bolts 50 mm
KD Bolts 35 mm
Allen Key #4
2
3
3
How to Assembly :
Require two persons to perform this assembly process.
STEP 1 :
Install 2 Wood Stretchers (3) to 2 Side Panels (2), make sure they stand firmly.
Place KD Bolt M6 x 50 mm (C) with Flat Washer (A) and Spring Washer (B)
as per Detail 1, then use provided Allen Key #4 (E) to tighten the bolts at
4 points. A�er all bolts secured, place the False Tennon (4) as the holes cover.
STEP 2 :
Place the Table Top (1) upside down on the floor. It is recommended to lay
soft cloth to prevent unecessary scratches. Carefuly place the assembled base
to the Table Top. Locate the connection holes at the base to the Table Top Apron.
Place the KD Bolt M6 x 35 mm (D) with Flat Washer (A) and Spring Washer (B)
as per Detail 2, then secure and tighten bolts with Allen Key (E). Carefully turn
the assembled table upright and place it on the final loca�on.
1
Parts Include :
Qty No
1
8 pcs
2
8 pcs
3
4 pcs
4
4 pcs
1 pc
4
Descrip�on
Top and Panel
Side Panel
Wood Stretcher
False Tennon
A
C
B
E
Detail 1
Detail 2
A
D
B
E
Qty
1 pc
2 pcs
2 pcs
4 pcs
Page 1 of 2