Dantel PointMaster TL1 Installation Manual

NEBS
Certified
About this Practice:
This is a new document.
• The procedure described in this
document requires the use of the
TL1 PointMaster practice as well.
Reissued Practices: Updated and
new content can be identified by a
banner in the outside margin.
Issue date: March 2000
Copyright 2000 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered
TL1 P
™
I
NSTALLATION
PointMaster
Table of Contents
Introduction .......................................................................................... 2
Installation ............................................................................................ 2
Warranty ............................................................................................... 8
CAUTION
•
Install or remove modules from the shelf only when the power is off.
If you install a module in the shelf with the power on, the internal
circuitry may suffer damage and the product warranty will be void.
•
Remove and install circuit boards only in a static-safe environment
(use antistatic wrist straps, smocks, footwear, etc.).
•
Keep circuit boards in their antistatic bags when they are not in use.
•
Do not ship or store circuit boards near strong electrostatic, electromag-
netic, magnetic, or radioactive fields.
•
For more complete information on electrostatic discharge safety
precautions, refer to Bellcore
Printed in the U.S.A.
I
NSTALLATION
46310-IG-0300 <90-00226>
M
OINT ASTER
G
CPU/Alarm
TXD Mstr
RXD Mstr
TXD Exp.
RXD Exp.
Fuse
Low Batt
TM
Technical Reference # TR-NWT-000870.
& O M
PERATION ANUAL
UIDE