Advertisement
Quick Links
About this Practice:
This practice has been reissued to:
• Move the Applications Information
section forward.
Reissued Practices: Updated and
new content can be identified by a
banner in the right margin.
Issue date: March 1998
Copyright 1998 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered
S
UMMARY
M
ODULE
Table of Contents
Ordering Information ........................................................................... 2
General Description .............................................................................. 2
Circuit Description ............................................................................... 3
Application Information ....................................................................... 6
Installation .......................................................................................... 10
Operation ............................................................................................ 13
Technical Specifications ..................................................................... 14
Warranty ............................................................................................. 16
CAUTION
•
Install or remove modules from the shelf only when the power is off.
If you install a module in the shelf with the power on, the internal
circuitry may suffer damage and the product warranty will be void.
•
Remove and install circuit boards only in a static-safe environment
(use antistatic wrist straps, smocks, footwear, etc.).
•
Keep circuit boards in their antistatic bags when they are not in use.
•
Do not ship or store circuit boards near strong electrostatic, electromag-
netic, magnetic, or radioactive fields.
•
For more complete information on electrostatic discharge safety
precautions, refer to Bellcore
Printed in the U.S.A.
I
NSTALLATION
46017
A
UDIBLE
(SAAM)
46017-00
SUMMARY
AUDIBLE ALARM
EXIST
NEW
ON
ACK
ACO
GROUP 1
EXIST
NEW
ON
ACK
ACO
GROUP 2
ON
ACK
ACO
A11-46017-00 REV__
TM
Technical Reference # TR-NWT-000870.
& O
M
PERATION
ANUAL
46017-0398 <90-00006>
A
LARM
Advertisement
Related Manuals for Dantel 46017
Summary of Contents for Dantel 46017
-
Page 1: Table Of Contents
For more complete information on electrostatic discharge safety Issue date: March 1998 precautions, refer to Bellcore Technical Reference # TR-NWT-000870. Copyright 1998 by Dantel, Inc. • Dantel is a registered trademark of Dantel, Inc. • ISO 9001 Registered Printed in the U.S.A. -
Page 2: Ordering Information
A timer can be set to acknowledge all alarms automatically. There are two options of the module: 46017-01 - The first four inputs of each group are TTL as well as optically coupled (OC) inputs. The second four inputs of each alarm group are OC only. -
Page 3: Circuit Description
♦ Connect pin 29 of the EXT ACK to ground. Connect pin 31 to pins 41 and 15 of 46017 modules. Pressing the EXT ACK button will acknowledge alarms on the 46017 SAAM and all modules to which the switch is wired. - Page 4 CIRCUIT DESCRIPTION . 1 - F , 46017 UNCTIONAL CHEMATIC AUTOMATIC ALARM ACKNOWLEDGEMENT CIRCUIT 46017-0398 <90-00006>...
- Page 5 Power Supply The power supply operates on -21 to -56 VDC input power. It supplies regulated +5 VDC as well as +12 and -12 VDC power to the 46017 module’s circuits. 46017-0398 <90-00006>...
-
Page 6: Application Information
46017 SAAM optically coupled inputs connect to the MAT alarm bus outputs. This application can use up to 8 MATs. The 46017 SAAM reports alarms on only two levels. Group 2 always precedes Group 1. Connect a second 46017 SAAM for additional alarm level inputs. - Page 7 Single-Level Application Fig. 3 shows a single-level alarm reporting application using 46009 and 46010 MATs. The 46017 SAAM connects to each of 16 MAT priority alarm level A outputs. The output indicates an alarm condition to service personnel. This application can use up to 16 MATs.
- Page 8 SAAM TTL compatible alarm inputs connect to one or more MAP external alarm outputs (pins 29-32). Use of 46017 SAAM TTL inputs reduces the available number of alarms from 16 to 8 (4 for each alarm group). Use alarm group TTL inputs for in-shelf applications only.
- Page 9 EXIST relay does not signal the external device. The built-in audible device continues operating until it times out or it acknowledges the alarms. . 5 - E XTERNAL EVICE ONNECTION PPLICATION (EXIST) (EXIST) EXTERNAL EXTERNAL DEVICE DEVICE (NEW) (NEW) 46017-0398 <90-00006>...
-
Page 10: Installation
ABLE B WITCH ETTINGS TIME PERIODS SWITCH SETTINGS Continuous (no time-out) 1 minute 4 minutes 8 minutes 16 minutes . 6 - S , 46017 S WITCH OCATION UMMARY UDIBLE LARM ODULE 46017-0398 <90-00006>... - Page 11 Group 2 to a remote ground source. ♦ Connect pin 29 of the EXT ACK to ground. Connect pin 31 to pins 41 and 15 of 46017 modules. Pressing the EXT ACK button will acknowledge alarms on all the modules to which the switch is wired.
- Page 12 INSTALLATION 4. Install the module in the proper slot in the equipment shelf. The 46017 is usually installed in a pre-wired Dantel shelf. Refer to Fig. 8 if custom wiring is required. . 8 - P , 46017 ESIGNATIONS K1-B-NOR, Open...
-
Page 13: Operation
INSTALLATION HECKOUT To check the operation of the 46017 SAAM, monitor the unit in a system: Apply an alarm at each input being used and observe the front panel for proper audible alarm, LED, and relay operation. Acknowledge the alarms and verify that the audible alarms stops, the NEW LEDs turn off, and the NEW relays release. -
Page 14: Technical Specifications
Ground to Operate (greater than 1.0 mA at -21 to -56 VDC) Audio Alarm Type and Frequency Sonalert #PAL-328N @ 3600 Hz Temperature Range 0° to 60° C. Physical Dimensions 1.4" x 6.0" x 5.6" Weight 12.5 ounces 46017-0398 <90-00006>... - Page 15 NOTES 46017-0398 <90-00006>...
-
Page 16: Warranty
To ensure expedient processing of your order, provide a purchase order number and shipping and billing information when requesting an RMA number. Also, when the units are returned to Dantel, include a descrip- tion of the failure symptoms for each unit returned. Send defective equipment to: Dantel, Inc.