CyberPower CST1500SUC User Manual page 4

INSTALLING YOUR UPS SYSTEM
3. Plug the UPS
into a 2 pole, 3
wire grounded
receptacle (wall
outlet). Make sure
the wall branch
outlet is protected
by a fuse or circuit breaker and does not
service equipment with large electrical
demands (e.g. air conditioner, copier, etc...).
The warranty prohibits the use of extension
cords, outlet strips, and surge strips.
4. Press the power switch to turn the unit on.
The Power On indicator light will illuminate
and the unit will "beep". If an overload is
detected, an audible alarm will sound and
the unit will emit one long beep. To correct
this, turn the UPS off and unplug at least one
piece of equipment from the battery power
supplied outlets. Make sure the circuit breaker
is depressed and then turn the UPS on.
CYBERPOWER GREENPOWER UPS™ TECHNOLOGY
Advanced Energy-Saving Patented Bypass Technology
The GreenPower UPS™ has a high-efficiency charger, which makes it the most energy-
efficient UPS in its class. The advanced high-frequency charging system significantly
improves charging efficiency and conserves energy. As a result of this advanced design,
the GreenPower UPS™ uses less energy compared to competitive models. The GreenPower
UPS™ is manufactured in accordance with the Restriction on Hazardous Substances (RoHS)
directive making it one of the most environmentally-friendly UPS on the market today.
SYSTEM FUNCTION BLOCK DIAGRAM
EMI Fllter
Input
Normal Mode
Battery Mode
- continued
PLUG IN
Surge
Suppressor
Charger
AC / DC
5. To maintain optimal battery charge, leave
the UPS plugged into an AC outlet at all
times.
6. To store the UPS for an extended period,
cover it and store with the battery fully
charged. While in storage, recharge the
battery every three months to ensure
battery life.
7. Ensure the wall outlet and UPS are located
near the equipment being attached for
proper accessibility.
AVR
Battery
G P UPS
REEN OWER ™
Energy-Saving Technology
Output
Inverter