Project Source KC1820CS Instructions Manual page 7

ASSEMBLY INSTRUCTIONS
3. At this point lift the front or back assembled frame and
add 7 female braces (G). Then lift up another frame and
add 7 male braces (H). Connect the first and second
frame along with diagonal bar (F). For the remaining frames
use the female braces (G). Add the diagonal bar (F)
between the last two frames.
NOTE: PUT PLASTIC CAPS ON ALL OPEN ENDS OF
TUBES"G" AND 'H' ALSO ON TUBES "A".
Hardware Used
Q
M6 x 100 mm Bolt
4. Before you install the tarp, make sure the distance
between the legs (AC, BD) is 18 feet wide, including the
legs. Also verify that diagonal distances AD and BC are
equal, and lengths AB and CD are equal.
5. Take the tarp and place it over the structure. Make sure
that the windows are on the two sides of the shelter, at
the front or at the back as your choice. Make sure ties
are on the inside.
3
x 20
4
5
Page 7