Safety Information; Preparation - Project Source KC1820CS Instructions Manual

IMPORTANT: VENDOR REPRESENTS, WARRANTS AND AGREES THAT LABELING,
DESIGN, PACKAGING, SPECIFICATIONS SHALL COMPLY IN ALL RESPECTS WITH ALL
APPLICABLE LAWS AND STANDARDS.

SAFETY INFORMATION

Please read and understand this entire manual before attempting to assemble, operate or install the
product.
This winter car shelter is designed specifically to provide vehicle shelter from the elements during
winter months. This unit must be assembled in accordance with the assembly instructions provided.
During severe winter conditions, an excessive accumulation of snow or ice on the canopy roof may
pose a safety concern. Under such conditions, accumulations of snow or ice must be removed from
the exterior of the shelter as there may be a weight overload on the canopy which could affect the
unit's structural integrity. This winter shelter must be properly secured to avoid movement and/or
subsequent damage. There are numerous methods available to owners. Please obtain advice at
your point of purchase on which method of anchoring is most suitable for your location. The shelter
must be installed on a flat surface.
WARNING
Keep all heat sources and flame away from this shelter. This shelter is meant for vehicle storage
only and should not be used as a shelter for personal and/or public gatherings.
Do not walk on the top of the car shelter and be sure to clean the top of the car shelter after each
snowfall.
CAUTION
Please retain a copy of your point of purchase receipt. It will be required as reference when making
any warranty claim. Please check the municipal by-law prior to setting up the product.

PREPARATION

Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time:
Tools Required for Assembly (not included):
120 minutes
N/A
Page 5