Project Source KC1820CS Instructions Manual page 6

ASSEMBLY INSTRUCTIONS
1. Take a center arch (C) and insert a corner arch (B) at
each end. Secure the male and female door rail (D) and
(E) to the corner arch (B) along with the bar brackets (J).
Slide the rail hooks (K) over the door rails before
connecting them to the center arch using the T-bar (I)&
(1-1). Repeat this step for all arches.
Hardware Used
O
M6 x 45 mm Bolt
P
M6 x 75 mm Bolt
Q
M6 x 100 mm Bolt
Large Door Rail Hook
K
J Bar Bracket
2. On the end of each corner arch(B), install the leg(A).
Repeat this step for all legs.
1
x 10
x 25
x 5
x 24
x 10
2
Page 6