Technical Features; Warranty - icoms TMA-122 User Manual

Configuration, tune up procedure

Hide thumbs Also See for TMA-122:

User manual (13 pages)

Table of Contents

o If the distance (offset) between the pole and the traffic lane is too wide, you can incline slightly the

radar in direction of the pavement/signal side.

To keep in mind:

The TMA-122 is not designed to detect on more than a single lane road (approaching traffic).

Receding traffic within the radar lobe has no effect.

To get the best result in terms of accuracy, the radar bracket (n°1) must be parallel to the approaching traffic

direction.

The presence (stationary) detection is based on tracking algorithms: the radar needs to detect an approaching

movement combined to a decreasing speed to validate the detection. Therefore, cars already parked during

the installation won't be detected.

The radar might be sensitive to pedestrian movement: if a pedestrian crosses the road between the vehicle and

the stop-line, it might interfere. Furthermore, if the radar lobe is partly on the pedestrian path, a pedestrian

moving or stopping within the detection area might also create a false detection status.

Protection level

Power supply

Power consumption

User output

Temperature range

Wiring & connectors

Operating frequency

Max. transmit power

Dimensions

Weight (excl. cable &

mounting support)

Icoms Detections warrants its hardware products to be free from defects in workmanship and materials, under

normal use and service, for a period of two (2) years from the date of dispatch from Icoms Detections premises,

except for the batteries for which a warranty period of six (6) months applies.

If a product does not operate as warranted during the applicable warranty period, Icoms Detections shall, at its

option, either repair the defective unit, or deliver an equivalent product or part to replace the defective item. All

products that are replaced become property of Icoms Detections.

The defective product must be returned to Icoms Detections within the applicable warranty period. The defective

product must be shipped DDP (delivered duty paid) back to Icoms Detections, wrapped in the original or similar

shipping package to ensure that it will not be damaged during transportation. It must be accompanied by

appropriate paperwork (ask first for a Return Material Authorization number) detailing the nature of the defect

experienced.

Icoms Detections shall be under no liability in respect of any defect arising from normal wear and tear, willful

damage, negligence, damage due to inappropriate packaging, abnormal working conditions, failure to follow Icoms

Detections instructions (whether oral or in writing), misuse, improper installation, alteration or repair without

Icoms Detections approval.