Display Settings - Kenwood DMX809S Quick Start Manual

Settings Settings
2
Touch [Distance] (1), and then adjust the
following parameters (2).
Front Focus Adjust
Distance Gain
Sound Image LR(Front)
Sound Image LR(Rear)
0.94ms 0.94ms
Size of the Virtual Sound Field
Subwoofer Delay
0.94ms 0.94ms
Initialize
0.94ms
[Sound Image Locates the sound image in
LR (Front)] front of the front seats, and
adjust the balance.
• You can mute the sounds
of the rear speakers and
subwoofer.
[Sound Image Locates the sound image in
LR (Rear)] front of the rear seats, and
adjust the balance.
[Size of the Adjusts the virtual sound field to
Virtual Sound the desired field size.
Field] • If the sound image moves out
of the front position, adjust
[Sound Image LR (Front)]/
[Sound Image LR (Rear)].
[Subwoofer
Adjusts the delay time of
Delay] subwoofer sound.
• To close and finish the parameter setting, touch
[Close].
46 ENGLISH
3
Touch [Gain] (1), and then adjust the
sound level of each speaker (2).
Front Focus Adjust
Tweeter
0.0 dB
Front L Front R
0 dB 0 dB
Rear L Rear R
0 dB 0 dB
Subwoofer
Initialize
0 dB
To initialize the setting value: Touch [Initialize].
<Volume Offset>
Adjust and store the auto-adjustment volume level for
each source.
The volume level will automatically increase or
decrease when you change the source.
• –5 to +5 (Initial: 0)

Display settings

1 Display the <Display> screen.
On the source/option selection screen (page 12):
Then, on the <Setup> screen, touch as follows:
[Display] (1) → [Enter] for the item you adjust or
the appropriate setting for the item (2).
Setup
Dimmer
Audio Auto
User Customize
Display
Enter
OSD Clock
Input
ON OFF
Demonstration
System ON OFF
Scroll
ON Once OFF
2
Adjust the item if more steps are required.
See the respective explanation that follows.
<Dimmer>
• Auto (Initial): Dims the screen and button
illumination when you turn on the headlights.
– The ILLUMI lead connection is required
(page 59).
• ON: Activates dimmer.
• OFF: Deactivates dimmer.