Av Settings; Display Settings - Kenwood DDX719WBLT Instruction Manual

Settings Settings
<Realizer>
Virtually makes the sound more realistic using the
Digital Signal Processor (DSP) system. Select the sound
level.
• OFF (Initial)/1/2/3
<Stage EQ>
Moves the localization of the sound image to the
lower or higher point. Select the height.
• OFF (Initial)/Low/Middle/High
38 ENGLISH
Determining the value for <Position/DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker, the
delay time will be automatically computed and set.
1 Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance of
the furthest speaker and other speakers.
4 Set the DTA value calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers.
E.g. When [Front All] is selected as the listening
position
1.4 ft
2.45 ft
4.9 ft
+0 ft

AV settings

Display the <AV> screen.
On the Home screen, touch as follows:
Then, on the <SETUP> screen, touch [AV].
<TV Tuner Control>
• ON: Enables control of TV operation on "AV-IN".
• OFF (Initial): Selects this to use "AV-IN" with
components other than TV Tuner.

Display settings

Display the <Display> screen.
On the Home screen, touch as follows:
+3.5 ft
Then, on the <SETUP> screen, touch [Display].
+2.45 ft
<Dimmer>
• OFF: Deactivates dimmer.
• ON: Activates dimmer.
• SYNC (Initial): Dims the screen and button
illumination when you turn on the headlights.
– For DDX6019BT/DMX6019BT/DMX5019BT, the
ILLUMI lead connection is required. (Page 50)