Display Cable - Dell XPS L701X Service Manual

1 screws (12)
3 display panel
Replacing the Display Panel
1. Follow the instructions in
2. Place the display panel over the display back cover.
3. Route the display cable through the routing guide on the left display hinge.
4. Route the antenna cables through the routing guide on the right display hinge.
5. Use the alignment posts to place the touch-screen board on the display back cover.
6. Connect the touch-screen board cable to the connector on the touch-screen board.
7. Replace the 12 screws that secure the display panel to the display back cover.
8. Replace the camera module (see
9. Replace the display bezel (see
10. Replace the display assembly (see
CAUTION:
result in damage to the computer.
Display Cable
Removing the Display Cable
1. Follow the instructions in
2. Remove the display assembly (see
3. Remove the display bezel (see
4. Remove the camera module
5. Remove the display panel (see
Great user manuals database on
2 hinges (2)
Before You Begin.
Replacing the Camera
Replacing the Display
Replacing the Display
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
Before You Begin.
Removing the Display
Removing the Display
(Removing the Camera
Removing the Display
UserManuals.info
Module).
Bezel).
Assembly).
Assembly).
Bezel).
Module).
Panel).