3. Route the display cable through the routing guides.
4. Connect the display cable to the system-board connector.
5. Replace the screw that secures the display grounding cable to the top cover.
6. Connect the touch screen cable to the system-board connector.
7. Route the Mini-Card antenna cables through the routing guides.
8. Connect the appropriate antenna cables to the Mini-Cards(s) on your computer (see
9. Replace the keyboard (see
10. Replace the palm-rest assembly (see
11. Replace the optical drive (see
12. Replace the two screws that secure the display assembly to the base cover.
13. Follow the instructions in
14. Replace the memory module(s) (see
15. Replace the module cover (see
16. Replace the battery (see
CAUTION:
result in damage to the computer.
Display Bezel
Removing the Display Bezel
CAUTION:
1. Follow the instructions in
2. Remove the display assembly (see
3. Push the display bezel outwards to release it from the tabs that secure the display bezel to the back cover.
4. Using your fingertips gently pry the outside edge of the display bezel off the back cover.
5. Lift the display bezel off the display assembly.
Great user manuals database on
Replacing the
Keyboard).
Replacing the Palm-Rest
Replacing the Optical
step 5
in
Replacing the Hard
Replacing the Memory
Replacing the Module
Replacing the
Battery).
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
The display bezel is extremely fragile. Be careful when removing it to prevent damaging the bezel.
Before You
Begin.
Removing the Display
UserManuals.info
Replacing the
Assembly).
Drive).
Drive(s).
Module(s)).
Cover).
Assembly).
Mini-Card(s)).