Removing The Power-Button Board; Replacing The Power-Button Board - Dell XPS L701X Service Manual

Back to Contents Page
Power-Button Board
Dell™ XPS™ L701X Service Manual
Removing the Power-Button Board
Replacing the Power-Button Board
WARNING:
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
is not covered by your warranty.
CAUTION:
surface (such as a connector on your computer).
CAUTION:
computer.
Removing the Power-Button Board
1. Follow the instructions in
2. Remove the battery (see
3. Remove the module cover (see
4. Remove the memory module(s) (see
5. Follow the instructions in
6. Remove the optical drive (see
7. Remove the palm-rest assembly (see
8. Turn the palm-rest assembly over.
9. Lift the connector latch and pull the pull-tab to disconnect the power-button board cable from the connector on the power-button board.
10. Remove the two screws that secure the power-button board to the palm-rest assembly.
11. Lift the power-button board off the palm-rest assembly.
1 screws (2)
3 power-button board
Replacing the Power-Button Board
1. Follow the instructions in
Great user manuals database on
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
To help prevent damage to the system board, remove the main battery (see
Before You Begin.
Removing the Battery).
Removing the Module
Removing the Memory
step 5 in Removing the Hard
Removing the Optical
Removing the Palm-Rest
2 palm-rest assembly
4 power-button board cable connector
Before You Begin.
UserManuals.info
Removing the
Cover).
Module(s)).
Drive(s).
Drive).
Assembly).
Battery) before working inside the